Smart Power Charge Inspire Matrice Charger

Smart Power Charge Inspire Matrice Charger

• Rapidly and Simultaneously charge 6 (with DJI battery to remote cables) of your Inspire, Matrice 600 (M600), Matrice 100 (M100) batteries to keep you in the air!

• • Commercial Grade Inspire / Matrice 100 and Matrice 600 simultaneous battery charger. SPCM100

  • Built exclusively for the DJI smart LiPo battery

  • Micro-Processor controlled with built in over-voltage & short circuit protection and temperature control.

  • Voltage and temperature monitoring

  • Deep Cycle mode performs deep cycle and then auto re-charges to extend LiPo battery life

    The Smart Power Charge Inspire Matrice Charger (SPCM100) is a commercial grade QUAD Charging Station designed and built exclusively for the DJI SMART BATTERY (LiPo) that is used in your INSPIRE1, Matrice M100, and the NEW MATRICE M600 batteries. This system is MICRO-PROCESSOR controlled with built in Over-Voltage protection, Over-Loading Protection and Temperature Control on power supply input. The Short-Circuit protection on power supply input insures safe operation while charging the batteries. The SCPM100 also monitors the voltage and temperature to each battery insuring that each battery is charged safely eliminating damage and LIPO safety concerns. The system is capable of charging or deep cycling 4 DJI Smart Batteries simultaneously, your iPhone, or any USB device and 2 rechargeable remote controls (via 2, 26v charging ports on the end of device), all at the same time. You can even DEEP CYCLE selected batteries while charging others. When you put a SLOT in DEEP CYCLE MODE, we LOCK discharge at low voltage down to 8%. After the battery reaches below 5%, the system will automatically charge the battery to full capacity. The SPCM100 Charging Station is capable of simultaneously charging the TB47 and TB48. Set em in, turn it ON and forget it! A must have for serious INSPIRE1 users. For a complete HOW TO, CLICK HERE! 1. Charge 4 Batteries Simultaneously (Up to 6 with DJI Cable) 2. Charge 2 REMOTE CONTROLS at same time with batteries 3. Charge 2 USB devices such as your iPAD or iPhone or both with batteries and remotes all simultaneously. (8 devices charging at the same time) 4. Deep cycle and condition your batteries according to DJI recommendation 5. Auto charge your batteries after DEEP CYCLE MODE. 6. FIRMWARE Upgradable
  • Compatible Batteries:
    • Inspire 1 Series Intelligent Flight Battery (TB47/TB48)
    • Matrice 100 Intelligent Flight Battery (TB47D/TB48D)
    • Matrice 600 Intelligent Flight Battery (TB47S/TB48S)
  • Compatible Remote Controller:
    • Inspire 1 Series Remote Controller
    • Matrice 100 Remote Controller
    • Matrice 600 Remote Controller
    • Lightbridge 2 Remote Controller
    • Phantom 4 Remote Controller
    • Phantom 3 Professional/Advanced/4K Remote Controller

• Manufacturer Information

If you are interested in Renting this product checkout our Rental website at www.BlueSkiesDroneRental.com

We work with 2 different companies for financing.  Each Organization has their own criteria for purchases.

 BNC Financial

 First Pacific Funding

Need Support?

Visit Here